4 molds egg tray machine with 1300pcs per hour capacity low cost compact structure PLC control

Short Description:

This capacity egg tray machine is used widely for small-medium company who wants to start a new business.

It is in Compact structure, which no need many basic work for customers to do in their workshop.

Product Detail

Product Tags

Technical data

Egg Tray Mold Quantity 4pcs
Raw material Waste paper
Egg tray Capacity 1300pcs/hour
Net weight per piece (gram) 70g-75g
Waste paper consumption 97.5kg / hour
Water Consumption 0.2ton / hour
Natural Gas Consumption of Dryer 50cbm/h
Worker requirement 4-6workers
Machine Length 8m-35m
Machine weight 8-30tons
Power Requirement Without dryer 45KW
With dryer 65KW
Area of workshop Without dryer More than 150 M²
With dryer, dryer-24m More than320M²
Container Requirement Without dryer 40ft*1
With dryer 40ft*3
Remarks:1. The egg tray Capacity calculated base on 30-packed egg tray(size 300x300mm, weight 70g~75g).
2. Workshop size is for reference only and could be adjusted according to actual size of client’s plant.

 

………………………………………………………………………………………………………………………………………………………………………………………………………………………

Egg Tray Machine Section

 

Egg Tray Pulping System:

 

Put the waster paper into the hydraulic pulper , the paper and water will mix in hydraulic pulper ,then go to the refiner machine ,refiner machine make the pulp more small and uniform ,then the pulp pump absorb the pulp to the pulp pool .after the second mix in the pulp pool ,the pulp will go to the form machine pulp tank .

 

2. Egg Tray Molding Forming System :  

 

The Egg Tray Molding Forming System consists of various equipment and dies.

 

The wet forming section consists of a series of wire screen covered wet forming dies mounted on a molding drum, and a matching set of transfer dies mounted on a transfer mechanism.

 

The egg tray forming die is made up of rigid corrosive resistant metal or ABS engineering plastic and consists of many component parts that are drilled with small drainage holes and covered by prior to formed stainless steel screens.

 

The forming die, mounted on the molding drum is rotated at a uniform speed, immersing it in a taper flow vat containing the pulp slurry of about 1% consistency of fibers in recycled water. A vacuum system attracts the fibers to deposit on the forming die screens as the suspending recycle water is drawn through the screen and drainage holes.

 

The vacuum pump will offer the vacuum to make the forming mould absorb the pulp from the pulp tank. One PLC cabinet will control the pulp absorb time ,the finished product will be shaped on the forming mould ,then the transfer mould transfer the products to the drying line ,the air compressor will give the air to blow the products ,then the products will drop down from the mould .Then the products is delivered to the drying line automatically; the water will go back to the water pool recycled.

 

3. Egg Tray Drying system (can use gas,dissel,coal for Boiler burner), which is  selectable for buyer.

 

There are burners and blowers on the two sides of the drying line. Burner creates the hot air and the blower increases it. There will be hot air mouth in the drying line also blow the hot air. The drying line is protected by the insulation board. The temperature inside the oven can reach 200 degree.

 

4. Egg Tray Automatic Stacking Machine:(changeable)

 

After drying line ,the egg trays go to the automatic counting and stacking system. You can preset the quantity of one pile ,such as 100pcs or 200pcs, when the quantity no is done, the counting device will be alarmed. And the products stacked at the same time. You can packaged them directly .

Advantages of our egg tray machine:

 1. Controlled by automatic computer soft ware
2. No need for installation, machine can start running only after connecting some pipes, power and water, and preparing the material
3. Some parts are Germany brand or other famous brand
4. Our egg tray machine can make different trays at same time by using different moulds
5. Besides egg tray, fruit trays, our machine also can produce industrial package
6. All installation and debugging work will be done before shipment.
7. 20 years’ experience on egg tray machine
8. 2 years warranty time

 

Delivery and Packaging ………………………………………………………………………………………………………………………………………………………………………………………………………………………

DSC_0012 DSC_0026
DSC_0032 DSC_0033

…Certificate…………………………………………………………………………………………………………………………………………………………………………………………………………………..

未标题-2 未标题-1

 

+86-531-88030983    +86-531-88096896      wanyoudu@hotmail.com  406 Shunxing Road, Sangzidian Town, Tianqiao District, Jinan City, Shandong China

 


  • Previous:
  • Next:

  • Write your message here and send it to us
    WhatsApp Online Chat !